Neutronics UltimaID User Manual

456 Creamery Way, Exton, PA 19341
Phone: 610.524.8800 • Fax: 610.524.8807 • Email: info@neutronicsinc.com
www.neutronicsinc.com
Thank you for purchasing this Neutronics Inc. product. Proper registration will enable us to send you periodic
notification of product updates and other important announcements. Registering your product will also allow us to
contact you in the unlikely event that it will need adjustment or modification. Please take the time to register your
new product at our web site:
http://www.neutronicsinc.com/productregistration
You will find the product serial number inside of the battery cover of the main unit and on the outside of the carton
box.
If you would like to register by phone, have any operational questions regarding your new purchase, find the
location of the distributor in your area, or for any other questions, please call 800-378-2287 (in PA: 610-524-8800).
Thank You.

Neutronics UltimaID Specifications

General

Communication Interface	USB
Display	LCD
Power Source	Rechargeable battery
Operating Temperature	32°F to 122°F (0°C to 50°C)
Operating Humidity	10% to 90% RH (non-condensing)
Data Logging	Yes, with internal memory
Sensors	Infrared sensor
Battery Life	8 hours continuous use

Summary

For Your Safety

Identifier Warnings

Summarizes warnings about refrigerant blends, sample filter, input, and battery charger.

General Cautions

Operational Cautions

Covers safety precautions for hose inspection, power, eye protection, electrical shock, venting, and usage.

WELCOME

1 INTRODUCTION AND OVERVIEW

1.1 GENERAL

Explains the purpose of the Ultima ID and the issues it addresses in refrigerant identification.

1.2 FEATURES

Lists the key features of the Ultima ID refrigerant identifier.

1.3 ULTIMA ID COMPONENTS

Details the various parts and accessories included with the Ultima ID.

1.3.1 Ultima ID Base Unit

Describes the main unit housing the display, infrared bench, and connections.

1.3.2 R134a Sample Hose

Details the construction and purpose of the R134a sample hose.

1.3.3 R12 Sample Hose

Details the construction and purpose of the R12 sample hose.

1.3.4 R134a Tank Adapter Fitting

Explains the adapter for connecting to R134a cylinders.

1.3.5 Vehicle Power Cable

Describes the cable used to power the unit from a vehicle battery.

1.3.6 Control Panel

Details the main user interface with display, buttons, and LEDs.

1.3.7 Back Panel Connections

Illustrates and describes the ports on the back of the unit.

1.3.8 Hard Shell Storage/Carrying Case

Describes the protective case for the instrument and components.

2 ULTIMA ID OPERATION

2.1 FIRST USE

Instructions for initial setup, including battery installation.

2.2 TURNING ON THE UNIT

Steps for connecting power and starting the instrument.

2.3 CALIBRATION

Explains the self-calibration process required before each test.

2.4 VIEWING THE TEST RESULTS

How to interpret the PASS/FAIL screens and detailed results.

2.5 BLEND REFRIGERANTS

Details the Blend ID feature for identifying EPA S.N.A.P. approved blends.

2.6 PRINTING THE TEST RESULTS

Instructions for printing test results using the optional built-in printer.

3 MAINTENANCE & TROUBLESHOOTING

3.1 SETTING THE ELEVATION

Guide to setting the instrument's operating elevation.

3.2 SETTING THE LCD CONTRAST

Instructions for adjusting the LCD screen contrast.

3.3 CHANGING THE SAMPLE FILTER

Steps for inspecting and replacing the sample filter.

3.4 CLEANING THE SAMPLE HOSES

Instructions for cleaning the sample hoses to remove oil and debris.

3.5 CHANGING THE PRINTER PAPER

Guide for replacing the thermal paper roll in the printer.

3.6 LOW BATTERY WARNING

Explains the low battery indication and recommended actions.

3.7 ERROR MESSAGES

Guidance on handling and resolving error messages displayed by the unit.

4 APPENDICES

4.1 SPARE PARTS LIST

Lists part numbers and descriptions for available spare parts.

4.2 APPENDIX B - SPECIFICATIONS

Provides technical specifications for the Ultima ID instrument.

4.3 APPENDIX E-WARRANTY

Details the warranty terms and conditions for the product.