32
Dante Network Connections 1
The 1073OPX optional digital card has both a primary Dante network port
DANTE PRI and a redundant secondary Dante network Port DANTE SEC.
The Primary network port connects to the primary Dante network along
with your Dante Controller enabled MAC/PC.
The 1073OPX DANTE SEC network port is used to create a secondary Dante
network. This network connection (if required) must also be made using a
separate gigabit ethernet switch.
For more information on secondary Dante Networks
visit: www.audinate.com
All Dante connections should be made using CAT5e or CAT6 ethernet cable and connections must be
made by using gigabit switches.
For more information on Dante Networked audio please visit www.audinate.com
To Next Page
Loading...
