34
Firmware Update Software 1
The Neve firmware update software can be found at www.AMS-Neve.com
>1073OPXproductpage >supporting documentation. The software program
is used to check your unit’s firmware is up to date and perform the
necessary updates if required. The windows application is 32-bit software
supported by windows 10. The MAC 64-bit software supports OSX
10.14/10.15 only.
First the software must be installed.
Run the installer package on your PC/MAC and follow the on-screen steps.
Once installed the software is ready to be connected to your 1073OPX unit.
Once connected and scanned the software will prompt the user to begin
firmware update if required.
To perform a firmware update-
Connect the unit via the COMMS ethernet connection to your
computer using a CAT5/CAT6 ethernet cable.
Run the update software program.
Click ‘scan network’
Discovered units will appear in the Neve Products dropdown box.
Product type, Name, IP address and MAC address will be displayed
underneath.
Select the unit to update from the drop-down menu
Click Auto Update
an indication will appear on screen informing which panels require
firmware updates and the update process will begin.
To Next Page
