72
To set the energy saving time, tap Energy saving. In the dialog box that is displayed, set a duration after which
the screen enters the lock mode if the screen is left un-operated. After the screen is locked, if the user does not
operate the screen within 120s, the screen enters the power off mode. The duration can be set to 30 MIN, 60 MIN,
90 MIN, or NEVER. You can also customize this duration and the range is 3 minutes to 480 minutes.
NEVER indicates that the automatic power off mode function is not enabled.
Screen Eye Filters
Enter the Screen Eye Filters submenu to set Writing Mode Filter, Brightness Mode Filter and Bluelight filter.
If only the Bluelight filter setting is on, the Filter level can be set.
To Next Page
Loading...
Need help?
General
