21
Getting Started
Power On
Ensure the power cable is fully seated into the panel and wall outlet before powering on the panel. Please confirm
your wall outlet supports a power range of 100V to 240V with frequency at 50 Hz/60 Hz ± 5% and is fully
grounded.
The power outlet should be installed near the equipment and should be easily accessible.
Flip the power switch located on the side of the product to “I”.
65" / 75" / 86"
Press the power button on the back panel or on the remote control.
Power Off
Press the power button on the back panel or the power button on the remote control to turn off the
panel in the following situations:
If there is no whiteboard data or screenshot(s), press the power button and then tap Turn off to power off
the panel.
If there is whiteboard data or screenshot(s), long press the power button on the back panel or on the remote
control. The Save session page will be displayed as shown in the following figure.
To Next Page
Loading...
Need help?
General
