Newport Electronics INFCP-B Series User Manual

6
Menu Configuration Displays
46464646
SECTION 6. MENU CONFIGURATION DISPLAYS
Not all menu items display on standard meters.
Table 6-1. Menu Configuration Displays
(Defaults in Bold and Italics)
MENU ∂TARE ßMAX
Show input choices: 100M
INPT
±50M
10V
±5V
0-20
(
Default
)
Show current decimal FFFF
(
Default
)
DEC.P
point position F.FFF
FF.FF
FFF.F
Reading Scale & Offset
Shows IN1
RD.S.O
Shows prior value entered and flashing digit. Changes the value
Scrolls to the next digit. of the flashing digit
• If
∂TARE is pressed, actual input
is shown and can not be changed
with ßMAX.
• If
ßMAX is pressed, unit can
scroll through digits with ∂TARE.
Enter new value and Shows prior value entered and flashing digit. Changes the value
show RD1 Scrolls to the next digit. of the flashing digit
Enter new value and Shows prior value entered and flashing digit. Changes the value
show IN2 Scrolls to the next digit. of the flashing digit
• If
∂TARE is pressed, actual input
is shown and can not be changed
with ßMAX.
• If
ßMAX is pressed, unit can
scroll through digits with ∂TARE.
Enter new value and Shows prior value entered and flashing digit. Changes the value
show RD2 Scrolls to the next digit. of the flashing digit
1
3
2
4
6
7
5
Downloaded from Elcodis.com electronic components distributor

Newport Electronics INFCP-B Series Specifications

General

Brand	Newport Electronics
Model	INFCP-B Series
Category	Measuring Instruments
Language	English