Newport 6000 - Model 6000 M and 6000 MF

10 Chapter 2 System Operation
faster. Turning slowly allows for a fine adjustment at the smallest displayed
decimal place.
2.3.2 Model 6000M and 6000MF
The only physical difference on the front panel for the Model 6000M and Model
6000MF is the TEC On button has been replaced by the MOPA Amplifier On button,
which allows independent control of each MOPA channel, and the LDD On button
has been renamed to OSC On button. The TEC On button was moved to the lower
soft key on the Master Display.
Only elements that differ on the 6000M and 6000MF are described below. See the
section above for a description of the other elements on the front panel.
3.
Oscillator Active LED
- Indicates MOPA oscillator output is on.
4.
OSC On Button
- Turns the MOPA oscillator output on/off.
5.
Amplifier Active LED
- Indicates MOPA amplifier output is on.
6.
AMP On Button
- Turns the MOPA amplifier output on/off.