Need help?Do you have a question about the Newport NK180 and is the answer not in the manual?
General| Compression Ratio | 8.5:1 |
|---|---|
| Fuel System | Carburetor |
| Max Torque | 10.8 Nm / 2500 rpm |
| Cooling System | Air-cooled |
| Starting System | Recoil |
| Fuel Tank Capacity | 3.6 L |
| Oil Capacity | 0.6 L |
| Type | 4-stroke, single cylinder |
Identifies the product's serial number for after-sale service reference.
Lists all items included in the package for the Kayak Motor NK180.
Provides diagrams and labels for motor, bracket, and controller components.
Details critical warnings: electric shock, explosion risks, and electromagnetic interference.
Provides essential pre-operation checks and guidelines for safe motor use.
Outlines safety precautions and operational guidelines during motor use.
Instructions for safe disconnection, flushing, and handling after motor operation.
Instructions for mounting the motor bracket using inserts, drilling, or an adapting plate.
Step-by-step guide for attaching the propeller to the motor shaft.
Explains steering setup, cable routing, and alignment with the motor.
Illustrates the overall motor setup after all control cables are installed.
Details fixing motor direction with external steering methods like a paddle.
Guides on adjusting the angle between water surface and motor via trim adjustment.
Instructions for connecting the signal cable from motor shaft to speed controller.
Provides steps for connecting the motor to compatible battery types, with safety warnings.
Explains the layout and function of the speed controller's multi-function display.
Details battery level display, including percentage and status icons.
Describes error icons on the display and their meanings for motor status.
Lists specific error codes, descriptions, and recommended solutions for troubleshooting.
Step-by-step guide to start the motor, including battery connection and screen activation.
Explains controlling motor's forward and reverse motion using the accelerator lever.
Details steering the kayak/boat by pulling steering cords on the steering triangle.
Provides methods for immediately stopping the motor, including the emergency stop switch.
Lists steps to safely stop the motor: lever, power button, kill switch.
Instructions for tilting the motor up for stowing or avoiding obstacles using a cord.
Guidelines for disconnecting, rinsing, and cleaning the motor after a trip.
Instructions for properly stowing and parking the motor, securing with string or bungee cord.
Process for safely removing the motor from the bracket for travel, leaving mount installed.
Maintenance tips for optimal motor condition: lubrication, cleaning, and checks.
Guidelines for preventing corrosion, especially after saltwater use, including flushing.
Advice on battery usage: connection tightness, terminals, and recharging practices.
Step-by-step instructions for replacing a damaged fin component on the motor.
To Next Page
