42
6.5 Stopping the Motor
To stop the motor, follow the steps below:
1. Move the accelerator lever on the speed controller to the neutral
position.
2. Press the On/O button on the speed controller.
3. Remove the emergency kill switch.
6.6 Tilting the Motor
When needed, the motor can be tilted up to stow away or to avoid
underwater obstacles. To do this, pull the cord on the swing arm
shown in the gure below until the motor pulls out of the water and
secure the cord in the forward position, keeping the motor out of
water. Make sure you secure the cord so that the motor will not drop
down when you let go.
To Next Page
Loading...