14
3.4 After Use
• Disconnect the motor from the battery after use.
• Flush the motor carefully with freshwater after each usage,
especially after use in saltwater.
• Do NOT carry the kayak/boat by lifting with the bracket. This can
cause damage to the boat and potentially to the bracket.
4 Installation
Installation Overview: The next several pages will give you detailed
instruction on how to install your motor, one piece at a time. Please
read all instructions carefully and refer to the diagrams.
4.1 Installation of the Bracket
First, remove the motor supporting drum from the bracket by opening
the quick release lever and slightly loosening the bolt on the quick
release axle.
4.1.1 Installation Using Existing Threaded Inserts
1. Place the bracket above the threaded inserts, align the holes on
the bracket with threaded inserts
M8 screw
M8 washer
To Next Page
Loading...