43
6.7 Finishing the Trip
When the trip is nished, please disconnect the motor from the battery
and take the motor out of water. If the motor was used in the saltwater,
thoroughly rinse the motor with fresh water. This will help prevent
corrosion and salt buildup. Only wash the motor; do not get the speed
controller wet.
6.8 Stow and Park the Motor
When the motor needs to be stowed and parked, tilt the motor up and
use string or bungee cord to bind the motor on the bracket. Please
use the gure below for reference.
Premade holes for tightening
motor in the stowed/ parked position
To Next Page
Loading...