Newport NK180 - Error Codes and Solutions

35
5.4 Error Codes and Solutions
If there is an issue with the motor function, the display will show an
error code to help diagnose the problem and nd the solution.
Error
Code
Description Solution
E-1 Drive PCB overheated
Stop the motor and wait until the error
code disappears, then restart the motor.
If the error code still shows up, contact
customer support about repairs.
E-2
Drive PCB overheated for
more than 5 mins.
Stop the motor and wait until the error
code disappears, then restart the motor.
If the error code still shows up, contact
customer support about repairs.
If the motor is not
operating under normal
condition, the error
code will be displayed
here.