26
5. Place the end of the cable where you can access it easily.
6. You may choose to create a dedicated guide for this cable near
the handle location as well. See www.newportvessels.com/kayak-
steering-accessories/ for more products.
4.3.5.3 Cable to Lift the Motor
1. Tie the cable securely to one side of the S biner.
2. Attach the S biner to the swing arm as shown.
3. Thread the cord through the cable guide on the bracket- this is
necessary to ensure proper function of raise/deploy function.
4. Install the handle on the other end of the cable.
Cable guide
To Next Page
Loading...