SHAPING THE FUTURE SATELLITE OF COMMUNICATIONS
ABOUT THIS MANUAL
This document provides a quick overview on how to easily set up the AZ110 with
ASI interface for the most common use cases.
This document is intended to help first time users:
• Find your way around the GUI;
• To understand the different possibilities of the AZ110 modulator;
• To configure the AZ110 for your specific configurations.
Cautions and Symbols
The following symbols appear in this manual:
A caution message indicates a hazardous situation that, if not
avoided, may result in minor or moderate injury. It may also refer
to a procedure or practice that, if not correctly followed, could
result in equipment damage or destruction.
A hint message indicates information for the proper operation of
your equipment, including helpful hints, shortcuts or important
reminders.
A reference message is used to direct to;
• An internal reference within the document;
• A related document or a web-link.
Version History and Applicability
Document
version
Date Subject Comments
Version 2.0 December 2
2009
AZ110 ASI Release 7
Version 3.0 December 2010 AZ110 ASI AES, DC-BUC power, GUI
update, REACH
Version 3.1 February 2011 AZ110 ASI Update, Alarm interfaces, back
panel information, rack
mounting information
To Next Page
Loading...