Newtec AZ110 - Page 41

How to Manage
User Manual for AZ110 Broadcast Satellite Modulator with ASI interface
version 3.2
40
SHAPING THE FUTURE SATELLITE OF COMMUNICATIONS
5.2.2.1 Read / Set the Device IP Address
The front panel can be used to set or read out the device IP address.
Open the following menu on the front panel:
 Unit >> Setup >> Ethernet Settings >> Device IP address
 Device IP Address: 10.0.0.1
5.2.2.2 For example change the Front Panel Screensaver
The front panel screensaver is useful to identify a number of units if you have more
than one unit.
Activate the screensaver in the following menu:
 AZ110 >>Unit>>Setup>>Display settings
• Enter the screensaver delay;
• Enter the screensaver message (for example Channel 01 Modulator 01).
Once the screensaver delay is reached without any key action on the front panel a
message is displayed as follows.
 AZ110
 Channel 01 Modulator 01
5.2.2.3 How to Log in as Expert
Proceed as follows to log in as Expert:
 Open the following menu on the front panel
 Unit >> Setup >> Device: Normal
 Press OK
 Normal <=Expert>
 Press OK
 Enter Password: ***
 Enter the number of the device
 Press OK to confirm.