PSM1700 PsimetriQ user manual
3-3
3.1 Selection from a list
This data type is used where there are only specific options
available such as the output may be ‘on’ or ‘off’, the graph
drawing algorithm may use ‘dots’ or ‘lines’.
When the flashing cursor is highlighting the parameter, the
RIGHT key steps forward through the list, and the LEFT
key steps backwards through the list. The number keys 0-
9 step directly to that point in the list, which provides a
quick way to jump through long lists. There is no need to
press the ENTER key with this data type
For example, if the waveform selection list comprises the
options:
sinewave (item 0)
triangle wave (item 1)
square wave (item 2)
leading sawtooth (item 3)
trailing sawtooth (item 4)
and the presently selected option is sinewave, there are 3
ways to select leading sawtooth:
press RIGHT three times
press LEFT twice
press number 3