PSM1700 PsimetriQ user manual
3-5
3.3 Text entry
There are occasions where it is useful to enter a text
string; for example, a non-volatile program may have
some text as a title.
Text is entered by selecting one of 6 starting characters
using the display control keys on the top row of the
keyboard, then stepping forwards or backwards through
the alphabet with the UP and DOWN keys.
The starting letters from left to right are A, E, I, O, U, or
space.
Numbers can also be inserted using the number keys.
The UP and DOWN keys step forward and backward using
the ASCII character definitions – other printable characters
such as # or ! can be obtained by stepping on from the
space. The available character set is given in the
Appendix.
When entering alphabetic characters, the ZOOM+ and
ZOOM- keys select upper and lower case respectively for
the character preceding the cursor and the next characters
to be entered.
The editing keys, RIGHT, LEFT, DELETE and ENTER
operate in the same way as for numeric entry.
To Next Page
Loading...
Need help?
General
