Newtons4th PSM1700 User Manual

PSM1700 PsimetriQ user manual
6-3
6.1 User data
PsimetriQ can be personalised by entering up to 3 lines of
user data as text (see section on text entry).
User data is displayed every time that the instrument is
switched on to identify the instrument. The entered text
may also be read over the communications to identify the
instrument (see USER?).
Typical arrangement of the user data might be:
line 1 company name
line 2 department or individual name
line 3 unique identifying number (eg. asset number)
Any user data may be entered as required, as the lines are
treated purely as text and are not interpreted by PsimetriQ
at all.
For use in a production environment, PsimetriQ supports
two modes of operation, supervisor and user. When
supervisor mode is disabled, the stored programs can only
be recalled, not changed. In user mode PsimetriQ will also
not accept any commands which could change the
calibration data.
After changing the user data or supervisor status, execute
‘store’ to save the data in non-volatile memory.

Newtons4th PSM1700 Specifications

General

Brand	Newtons4th
Model	PSM1700
Category	Measuring Instruments
Language	English