PSM1700 PsimetriQ user manual
6-2
displayed showing the new value. This message can be
disabled.
The 6 main function keys, FRA, PAV, LCR, RMS, POWER,
HARM, can be used to load stored configurations as a
“one-touch” way of configuring the instrument for specific
applications. This is particularly useful in a production
environment where an operator has a small number of
specific tests to perform.
Levels are usually expressed in volts but can be set and
displayed in dBm, which is a logarithmic scale referred to
1mW in 600Ω, often used when testing communications
components.
To save these system settings as default, store the setup
in program 1 so that they are reloaded on power on.
Pressing RIGHT from the SYSTEM OPTIONS menu selects
the USER DATA screen.
Pressing LEFT from first SYSTEM OPTIONS menu displays
the serial number, release versions, and calibration date.
To Next Page
Loading...
Need help?
General
