EN 45
HOW DO I ENABLE MOTION CONTROL ON THE AURORA PRO REMOTE?
Press the Air Mouse button on the remote and a cursor will appear on
the screen. You should now be able to point the remote at the screen to
direct the cursor.
CAN I ZOOM IN OR OUT WITHOUT MOVING THE PROJECTOR?
Yes, you can adjust the zoom by navigating to Display > Image
Adjustment > Adjust Zoom / Adjust Position.
HOW CAN I FIX A DISTORTED IMAGE?
Enter keystone correction by navigating to Settings > Display > Keystone
Correction. Try to fix the image with Four Point correction first. If the
image requires further correction, proceed to Eight Point correction.
HOW CAN I FIX A BLURRY IMAGE?
Adjust the focus by navigating to Settings > Display > Focus. Press the
left or right arrow buttons on the remote until the image becomes
clear. For the best picture clarity, use a flat white wall or a professional
80”-150” ambient light-rejecting screen.
HOW DO I PLAY 3D CONTENT ON THE AURORA PRO?
Once you have a 3D video file from your USB flash drive or HDMI source
opened, press and hold the Menu button on the remote, select Play-
back Settings from the Shortcut Menu, and enable 3D. For the best
experience, we recommend purchasing 3D glasses separately and
wearing them while you watch 3D movies.
TROUBLESHOOTING
WHAT IF THE REMOTE CONTROL DOES NOT WORK?
The batteries may be drained. Please replace the remote control
batteries.
There may be objects in front of the projector's IR sensor. Please
remove the objects.
The remote may be too far from the projector. Please use the remote
within 26 feet of the projector.
To Next Page
Loading...
