EN 47
WHAT IF THE IMAGE IS NOT RECTANGULAR?
In the projector menu, navigate to Settings > Display to adjust the
image. For additional information, please see the Image Adjustment
section of this manual.
WHAT IF THE SYSTEM CRASHES OR FREEZES?
Power off the projector and unplug the power cable. Allow the
projector to sit for one minute to allow the capacitors to discharge. Plug
it in again after one minute and power it on.
WHAT IF THE PROJECTOR SHUTS OFF BECAUSE OF OVERHEATING?
Please remove any objects that may be blocking the air vents on the
projector. Then restart the projector.
Move the projector away from heat sources such as air ducts, space
heaters, or direct sunlight.
Dolby, Dolby Vision, Dolby Atmos, and the double-D symbol are
registered trademarks of Dolby Laboratories Licensing Corporation.
Manufactured under license from Dolby Laboratories. Confidential
unpublished works. Copyright © 2012-2022 Dolby Laboratories.
All rights reserved.
To Next Page
Loading...
