Nextar Q4 Software Guide

26
Chapter 4—Setting Destinations
This chapter describes how to set destinations. The main topics cover—
• Setting a Destination Using an Address
• Setting a Destination Using a Point of Interest
• Setting a Destination Using Crossroads
• Setting a Destination Using an Entry in the Favorites List
• Setting a Destination Using an Item in the History List
Setting a Destination Using an Address
To set a destination using an address
1. From the main screen, tap MENU, and then GO TO. The Enter Destination
screen opens. (See below.)
Enter Destination screen
2. Tap ADDRESS. The main options for setting an address-based destination appear.
(See below.)
3. Select an option for entering an address as follows—
- START WITH CITY—to set a destination by entering a city name, then a
street address, and then a building number
- START WITH STREET—to set a destination by entering a street address,
and then a building number
- ADDRESS IN <<LAST-USED CITY NAME>>—to set a destination using a
street and address in the last-used city

Nextar Q4 Specifications

General

Brand	Nextar
Model	Q4
Category	GPS
Language	English