8. Speaker
Used for the two types of ‘notification’ sounds.
Sounds:
There are sounds, these are used to identify when recording starts / stops or has been
protected.
1. Start recording
A three-tone beep sound (ascending) will be heard when recording starts.
2. Stop recording
A three-tone beep sound (descending) will be heard when recording stops.
3. Protected Recording
A chime sound will be heard when a recording has been protected by
activation of the G Sensor or by pushing the protect button.
Announcements:
There are two spoken announcements, these are used to identify there is an SD card issue
that needs attention before recording can start.
i. Please insert Class 10 SD card
This is
heard when there is no SD card inserted.
ii. Card error, format SD card
The inserted card has previously been formatted to an incompatible standard for use
with the Dash Cam, this is usually resolved by simply re-formatting the SD card within
the Dash Cam.
Or for some reason the card is unable to be formatted using the Dash Cam.
See page 40 for details on how format the SD card.
Note:
- Should formatting the SD card not resolve the issue, please try another quality
branded SD card, making sure that is a Class 10 (48MB/s minimum) type.
- T he Sounds and Announcements can be turned On / Off from the DriveGuard™
APP as required.
PARTS & CONTROLS (CONTD.)
10
To Next Page
Loading...
Need help?
General
