Nibe AMS 10-16 - General information for the installer; Transport and storage

General information for the installer
Transport and storage
Outdoor module AMS 10
AMS 10-16 should be transported and stored vertically.
If the heat pump is to be lifted using lifting straps without
packaging, protect as illustrated.
The right-hand side of the heat pump (seen from the front)
is heavier.
The HBS 16 hydrobox
HBS 16 can be transported horizontally on its back and
must be stored horizontally and in dry conditions.
HE 30, HEV 300, HEV 500 tanks
HEV 300 and HEV 500 must be transported and stored
vertically in a dry place.
HE 30 must be transported and stored horizontally on its
back in a dry place.
Supplied components
HBS 16
Straps for 1 phase connectionOutside sensor
L
EK
LEK
LEK
LEK
Keys for the actuator motorsCurrent sensor, 3 phase
LEK
Particle filter and shut-off
valve
HE 30, HEV 300, HEV 500
LE
K
L
EK
LEK
LEK
LEK
LEK
HUMMEL
Patent
L
EK
Enclosed kit HEV 500Enclosed kit HE 30
LEK
Safety valve HEV 300
The enclosed kits are located behind the front service
cover in HBS 16, in the cardboard box on HE 30 and taped
under the tank on HEV 300 and on the pallet by HEV 500.
17NIBE™ SPLIT
For the Installer
General information for the installer