Sound pressure levels
AMS 10 is usually placed next to a house wall, which gives
a directed sound distribution that should be considered.
Accordingly, you should always attempt to find a place-
ment on the side that faces the least sound sensitive
neighbouring area.
The sound pressure levels are further affected by walls,
bricks, differences in ground level, etc and should therefore
only be seen as guide values.
2 m
LEK
Noise, AMS 10-16
71.5L
W
(A)Sound power level, according to EN12102 at 7/45°C (nominal)
57.5dB(A)Sound pressure level at2mfreestanding (nominal)
NIBE™ SPLIT92
Miscellaneous
Technical specifications
To Next Page
Loading...
