Nibe BA-SVM 10-200 Series User Manual

36 NIBE BA-SVM 10-200
8 Control - Introduction
Display
Instructions, settings and operational informa-
tion are shown on the display. You can easily nav-
igate between the different menus and options
to set the temperature or obtain the information
you require.
The USB port is hidden beneath the plastic
badge with the product name on it.
The USB port is used to update the software.
The switch has three positions:
• On ( I )
• Standby (
)
• Emergency mode ( )
Emergency mode must only be used in the
event of a malfunction of the control module.
In this mode, the compressor in the heat pump
switches off and the immersion heater engages.
The control module display is not illuminated and
the status lamp lights up yellow.
The status lamp indicates the status of the con-
trol module. The status lamp:
• lights up green during normal operation;
• lights up yellow in emergency mode;
• lights up red in the event of an alarm.
The OK button is used to:
• confirm submenu/option/value selection;
• scroll through the windows in the start
guide.
The Back button is used to:
• go back to the previous menu;
• change a setting that has not been con-
firmed.
The control knob can be turned to the right or
left. You can:
• scroll through menus and between options;
• increase and decrease the values;
• change page in multiple-page instructions
(for example help text and service info).
Display
USB port
Switch (SF1)
Status lamp
OK button
Back button
Control knob
A
G
F
B
C
D
E
Section 8 | Control - Introduction
A
B
C
D
E
F
Display
Status lamp
OK button
Back button
Control knob
Switch
INDOOR CLIMATE
MY SYSTEM INFO
HOT WATER
BA-SVM 10-200
G
USB port

Nibe BA-SVM 10-200 Series Specifications

General

Brand	Nibe
Model	BA-SVM 10-200 Series
Category	Air Conditioner
Language	English