Nibe BA-SVM 10-200 Series User Manual

74 NIBE BA-SVM 10-200
Energy label
Section 13 | Technical data
Model AMS10-6 + BA-SVM 10-200/6 E / E EM / R
Type of heat pump
Air-water
Exhaust-water
Brine-water
Water-water
Low-temperature heat pump
Yes No
Integrated immersion heater for additional heat
Yes No
Heat pump combination heater
Yes No
Climate
Average Cold Warm
Temperature application
Average (55°C) Low (35°C)
Applied standards EN14825 / EN16147, EN14511 and EN12102
Rated heat output
Prated 5.3 kW
Seasonal space heating energy efficiency
η
S
131 %
Declared capacity for space heating at part load and at outdoor temperature
Tj
Declared coefficient of performance for space heating at part load and at
outdoor temperature Tj
Tj=-7°C Pdh 4.7 kW Tj=-7°C Pdh 1.88 -
Tj=+2°C Pdh 2.8 kW Tj=+2°C Pdh 3.26 -
Tj=+7°C Pdh 1. 8 kW Tj=+7°C Pdh 4.72 -
Tj=+12°C Pdh 2.7 kW Tj=+12°C Pdh 6.47 -
Tj=biv Pdh 4.7 kW Tj=biv Pdh 1.88 -
Tj=TOL Pdh 4.1 kW Tj=TOL Pdh 1.77 -
Tj=-15°C(ifTOL<-20°C) Pdh kW Tj=-15°C(ifTOL<-20°C) Pdh -
Bivalent temperature T
biv
-7 °C Min. outdoor air temperature TOL -10 °C
Cycling interval capacity Pcych kW Cycling interval efficiency COPcyc -
Degradation coefficient Cdh 0.99 - Max supply temperature WTOL 58 °C
Power consumption in modes other than active mode Additional heat
Off mode P
OFF
0.007 kW Rated heat output Psup 1. 2 kW
Thermostat-off mode P
TO
0.012 kW
Standby mode P
SB
0.012 kW Type of energy input Electric
Crankcase heater mode P
CK
0 kW
Other items
Capacity control Variable Rated airflow (air-water) 2 526 m
3
/h
Sound power level, indoors/outdoors L
WA
35 / 51 dB Rated heating medium flow m
3
/h
Annual energy consumption
Q
HE
3 248 kWh
Brine flow rate in brine-water or water-water
heat pumps
m
3
/h

Nibe BA-SVM 10-200 Series Specifications

General

Brand	Nibe
Model	BA-SVM 10-200 Series
Category	Air Conditioner
Language	English