Nibe BIAWAR PELLUX 100/20 - Default Chapter; Information for the User

2 PELLUX 100/20 TOUCH
PELLUX 100/30 TOUCH
EN
Information for the User |
Information for the User
We recommend the following steps after the consumption of 300 kg of pellets:
1. Check both ash pans and the combustion chamber. Empty the ash from them and clean, if necessary.
2. Check the burner grate. If you  nd ash or deposits there, clean the grate (including air holes).
3. Check the bottom of the pellet tray. If dust has accumulated there clean it.
4. Remove the cleanout top cover, remove the turbulators and clean them (repeat this step every month).
5. Use only high quality wood pellets of a diameter from 6 to 10 mm and a maximum length of 30 mm.
Dataplates are located on the right side of the boiler.
Symbol Description
Pellux 100/20 Type of boiler
IP 21 Degree of protection
Q Range of electric power
P
QN
Power consumption at nominal
power
P
Qmin
Power consumption at minimum
power
T
max
The maximum operating temperature
PMS Maximum working pressure
V
B
Boiler storage capacity
C (EN 303-5) Boiler class acc. to the EN 303-5
F Basic fuel
The CE marking
Sign electro recycling - waste
Sign indicating the need to read
the manufacturer’s information
Symbol Description
PBMAX 20.1 Type of burner
IP 21 Degree of protection
Q Power Rating
P
max
Maximal electrical power
P
min
Minimal electrical power
M Weight
Wood pellets The required pellet size
Serial number
The CE marking
Sign electro recycling - waste
Sign indicating the need to read
the manufacturer’s information
The product is not intended for use by persons with reduced physical  tness/mental ef ciency or without experience and knowledge, if they
are not supervised or instructed by a person responsible for their safety.
Operation of the product by children is strictly prohibited.
We reserve the right to make product design changes and changes in the manual.
©NIBE-BIAWAR 2018
IMPORTANT
In summer, the boiler must remain connected to the power supply - to reduce the risk of condensation in the panel. To stop the
boiler operation, turn off the heating circuits on the regulator.