Nibe BIAWAR PELLUX 100/20 - Introduction to the PELLUX Boiler; Boiler Equipment Included; Optional Accessories for Pellux 100

4 PELLUX 100/20 TOUCH
PELLUX 100/30 TOUCH
EN
Thank you for your condence in us and our product,
we also congratulate you on your choice of the PEL-
LUX boiler. In order to achieve the highest efciency
and safe working conditions, please read this Installa-
tion & Operating Manual carefully and comply with the
recommendations and observations contained in it.
The PELLUX 100 boiler is designed to operate in
open or closed systems. Please note that the system
has to be protected in accordance with the applicable
regulations. For the boilers operating in an open and
closed systems, protection of the system must be in
accordance with local regulations. PELLUX 100 boil-
er’s can be used in residential single and multi-family
buildings, guest houses, department stores, etc.
The basic boiler fuel is a modern, eco-friendly fuel in
the form of wood pellets. A burner used in the unit en-
sures minimum pellet consumption in relation to the
thermal power received, resulting in fuel-efcient and
comfort operation of the boiler.
The PELLUX boiler has a compact design and oper-
ational solutions adapted to streamline its operation.
With the enhanced electronic control, you can control
many parameters of the unit, adjusting it to different
installation conditions and individual needs.
This Manual applies to the PELLUX 100/20 boiler
with the PBMAX 20.1 burner and the PELLUX 100/30
boiler with the PBMAX 30 burner.
The Pellux 100 boiler has been equipped with the fol-
lowing components of the set:
• Exhaust fan (1 pce)
• Round brush Ø 68 (1 pce)
• Temperature sensor CT2 L=0,6m (3 pcs)
• Ramrod handle (1 pce)
• PBMAX burner (1 pce)
• User manual (1 pce)
The Pellux 100 boiler can be equipped with additional
accessories that are not part of the Pellux 100 boiler
set. Below list of available accessories:
• Pellet bunker + feeder
ZP 350 + PP12 (300l - about 200kg)
ZP 600 + PP15 (500l - about 330kg)
• Internet module
• Wireless room temperature controller
• CAN communications cable 5,0 m
• CAN communications cable 1,5 m
• CAN communications cable 0,45 m
• CTP-02 room temperature sensor
• CAN 1/0 MC-1 expansion module
• ML-2 CAN Lambda probe module assembly
• CTZ-01 outdoor temperature sensor
• CTP02R room temperature sensor
• VIDE ROOM Wireless room temperature controller
Equipment
Optional Accessories
1 Introduction
Section 1 | ntroduction