Nibe F1226 series - Menu System Navigation

Menu system
SERVICE
INDOOR CLIMATE
HEAT PUMP
INFO
HOT WATER
Indoor temperature -
(if room sensors are
installed)
Hot water temp.
Temporary lux (if
activated)
Outdoor
temperature
Estimated amount of
hot water
Menu 1 - INDOOR CLIMATE
Setting and scheduling the indoor climate. See informa-
tion in the help menu or user manual.
Menu 2 - HOT WATER
Setting and scheduling hot water production. See inform-
ation in the help menu or user manual.
Menu 3 - INFO
Display of temperature and other operating information
and access to the alarm log. See information in the help
menu or user manual.
Menu 4 - HEAT PUMP
Setting time, date, language, display, operating mode
etc. See information in the help menu or user manual.
Menu 5 - SERVICE
Advanced settings. These settings are only intended for
installers or service engineers. The menu is visible when
the Back button is pressed for 7 seconds, when you are
in the start menu. See page 35.
31Chapter 7 | Control - IntroductionNIBE F1226