Nibe VVM 320 - Additional Heat and Alarm Logging; Viewing the Alarm Log

Menu 5 - SERVICE
OVERVIEW
5.1.1 - hot water settings5.1 - operating settings5 - SERVICE
5.1.2 - max flow line temperature
5.1.3 - max diff flow line temp.
5.1.4 - alarm actions
5.1.12 - internal electrical addition
5.1.14 - flow set. climate system
5.1.18 - flow setting charge pump
5.1.22 - heat pump testing
5.1.23 - compressor curve
5.2.2 - installed heat pump5.2 - system settings
5.2.4 - accessories
5.3.2 - shunt controlled add. heat *5.3 - accessory settings
5.3.3 - extra climate system *
5.3.6 - step controlled add. heat *
5.3.7 - external addition *
5.3.8 - hot water comfort *
5.3.11 - modbus *
5.3.12 - exhaust/supply air module *
5.3.15 - GBM communications module *
5.3.16 - humidity sensor *
5.3.18 - pool*
5.3.19 - active cooling 4 pipe*
5.3.21 - flow sensor/energy meter*
5.4 - soft in/outputs
5.5 - factory setting service
5.6 - forced control
5.7 - start guide
5.8 - quick start
5.9 - floor drying function
5.10 - change log
5.11.1.1 - heat pump5.11.1 - EB1015.11 -heat pump settings
5.11.1.2 - heating medium
pump (GP1)
5.12 - country
* Accessory needed.
Go to the main menu and hold the Back button in for 7
seconds to access the Service menu.
53Chapter 8 | Control - MenusNIBE VVM 320