Nice 7251 - Page 55

7251 / 7351 Slide Gate Operator
INSTALLATION AND PROGRAMMING MANUAL
55
FUNCTION BUTTON / Adv. Settings
FUNCTION
9. Adv. Sengs
Language
English
Language
English (blink)
Clock
24H (blinking)
Clock
24H
Contrast
100% (blinking)
Contrast
100%
Direcon Motor
->
Auto Close Opt.
On
Exit Opt.
O
An-Tailgate
O
Photo Test
O
Photo Test
O (blinking)
An-tailgate
O (blinking)
Inputs
Photo
Inputs
Photo (blinking)
Auto Close Opt.
On (blinking)
Exit Opt.
O (blinking)
Direcon Motor
-> (blinking)
12 Hour
English
0%
O
O
O
O
Photo
<-
24 Hour
English
100%
On
On
On
On
Loop
->
10. Default (see next page)
8. Standby (see previous page
UL Input
(See next page)
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
FUNCTION>ADVANCE SETTINGS MENU:
• LANGUAGE: English only
• CLOCK: Select 12H or 24H clock.
• CONTRAST: Do not set below 20%.
• DIRECTION MOTOR: Changes main
motor direction (Can only be performed in
learn mode). Only used on 24V commercial
operators.
• AUTO CLOSE OPTION: Allows auto close
timer to close from any open position.
• EXIT OPTION: Disables free exit input
when partially open.
• ANTI-TAILGATE: Closes gate
immediately after vehicle has cleared
safety sensors.
• PHOTO TEST: Factory use only.
• INPUTS: Select LOOP or PHOTO.
(Continued on next page)
NOTES:
• Turning contrast down to less than 20% may
make display unreadable.
• Motor direcon adjustable only in Learn
Mode.
www.ApolloGateOpeners.com | (800) 878-7829 | Sales@ApolloGateOpeners.com