EasyManuals Logo

Nice 7251 User Manual

Nice 7251
82 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
7251 / 7351 Slide Gate Operator
INSTALLATION AND PROGRAMMING MANUAL
3
Congratulations on selecting a Nice series gate operator using the 1050 control board. With proper selection,
system design, installation and maintenance this operator should provide years of reliable operation.
SECTION 1: 7251 / 7351 SLIDE GATE OPERATOR OVERVIEW
EXTREMELY IMPORTANT!
Anyone who installs, assists with installation or otherwise facilitates the installation in any manner should
thoroughly read and understand this manual in its entirety before any attempt is made to actually begin the
installation process.
The 1050 control board offers the following features:
2-line LCD with 5 dedicated programming buttons, 3 buttons for navigation, 3 buttons for open, close, and stop.
A plug-in Nice radio receiver for control by up to 1000 transmitters.
Connectors include 2-wire Bluebus for self-monitored photocells for entrapment protection.
Dry contact inputs provided for loop, probe, edge, & photo detectors, guard station, fire dept.
1050 control board accepts DC input voltage of 10VDC to 35VDC.
Voltage output (+12VDC and +24VDC) connectors to power various added accessories.
Built-in regulator to keep the battery charged (either through Solar or Main DC Power).
Inputs for batteries, Main DC Power, and solar panel.
Eight clock/calendar timers for scheduled weekly or daily events (i.e. opening, closing, or locking).
Programmable gate opening and closing speed, acceleration, soft-start settings, and reverse speed.
Programmable auto-close, force, speed, opening delay.
Built-in current sensing for gate force monitoring and limiting with on-board alarm.
Low power consumption in stand-by mode.
Built-in voltmeter to check input voltage, battery voltage, solar panel voltage and motor’s current.
Temperature sensor to optimize charging battery and system performance.
Programmable service alarm.
Surge suppression on every peripheral input (digital and analog).
A RJ-11 jack connection for optional O-view programmer and Bluetooth module for PC control.
1.1 1050 CONTROL BOARD FEATURES
www.ApolloGateOpeners.com | (800) 878-7829 | Sales@ApolloGateOpeners.com

Table of Contents

Other manuals for Nice 7251

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Nice 7251 and is the answer not in the manual?

Nice 7251 Specifications

General IconGeneral
BrandNice
Model7251
CategoryGate Opener
LanguageEnglish

Related product manuals