ENGLISH – 39
9.8 CONNECTING THE SOLEMYO SOLAR
ENERGY SYSTEM
f
When the automation is powered by the “Solemyo”
system, IT MUST NOT BE POWERED by the elec-
tricity grid at the same time.
l
For information on the “Solemyo” system, consult
the relevant instruction manual.
To connect the “Solemyo” system:
1. connect the system to the back-up battery (A)
2. insert the relative connector (B) on the control unit.
A
B
52
To Next Page
Loading...
Need help?
General
