Nice Titan 912L Installation & Reference Manual

TITAN 912L Linear Actuator
Installation Reference Manual
33
• TITAN 912L-1 = Actuator with 12’ harness
• TITAN 912L-2 = Actuator with 42’ harness
(dual gate only)
PIVOT ARM (P/N 1116)
ACTUATOR BOLT KIT
(P/N 1125)
GATE BRACKET,
BLACK
(P/N
10025215)
TITAN912L ACTUATOR PARTS IDENTIFICATION
PART# DESCRIPTION QTY
912L-1 Actuator With 12 foot Harness 1
912L-2 (DUAL GATE ONLY) Actuator With 42 foot Harness 1
1116 Pivot Arm 1
10025215 or PD0959A0000 Gate Bracket (Black) 1
1125 Actuator Bolt Kit 1
TITAN912L ACTUATOR SPECIFICATIONS
Drive
Electromechanical Stainless Steel Screw
Gate Length And Weight Max.
• Up to 600 lb. for 20 foot leaf (272 kg for 6 m)
• Up to 1000 lb for an 8 ft leaf (453 kg for 2.4 m)
Open/Close Time (To 90°)
14 - 16 seconds (adjustable)
Temperature Rating
-4º to 122º F (-20º to 50º C)
Operating Voltage
12VDC
Actuator Dimensions (LxWxD)
43 x 4 x 6.75 inches (109.2x 10x 17.5 cm)
User Controls
936 or 1050 control board
Listed To Ul325
936, 1050, or Mercury 310 Control Boards:
Usage Class I, II, III, IV
Actuator Weight
19.75 pounds (8.96 kg)
Congratulations on selecting a Nice TITAN 912L actuator. With proper selection, system design, installation and
maintenance this operator should provide years of reliable operation. This manual covers ONLY the installation
of the TITAN 912L actuator.
SECTION 1: TITAN 912L ACTUATOR OVERVIEW
IMPORTANT!
For control box installation, wiring, operation, maintenance instructions and all safety information,
refer to the appropriate control box installation manual used for the system being installed.
www.ApolloGateOpeners.com | (800) 878-7829 | Sales@ApolloGateOpeners.com

Nice Titan 912L Specifications

General

Brand	Nice
Model	Titan 912L
Category	Gate Opener
Language	English