TITAN 912L Linear Actuator
Installation Reference Manual
44
Below is a list of tools necessary for installation of the Titan actuator:
• Welder (for pivot arm) unless optional bolt-on pivot arm (P/N 446) is used.
• Basic hand tools (screwdrivers, wrenches, pliers, etc..)
• Torx 25 tool (for removing actuator cover screws)
• Level (for ensuring pivot arm and actuator are level).
• Framing square (for determining pivot arm location)
• Torch/Chop Saw (for cutting pivot arm)
• Grinder (for sanding Pivot Arm)
SECTION 2: INSTALLATION SAFETY
SECTION 3: TOOLS NEEDED FOR INSTALLATION
WARNING
READ ALL SAFETY INFORMATION WHEN INSTALLING A SWING GATE SYSTEM! SEE EITHER OF THE
FOLLOWING MANUALS FOR SAFETY INFORMATION:
• CBOX936 Control Box Installation and Program Manual (with 936 controller).
• CBOX1050 Control Box Installation and Program Manual (with 1050 controller).
• MB1050 Control Box Installation an Program Manual (with 1050 controller).
• ACBOX/SolarBOX Installation and Program Manual (with Mercury 310 controller)
CAUTION
’ Disconnect power at the control panel before making any electric service power connections.
’ Be aware of all moving parts and avoid close proximity to any pinch points.
IMPORTANT!
’ The gate operator installation is NOT a “do-it-yourself” project. Contract a qualied gate operator installation
company to install this system to ensure a safe and reliable installation.
’ It is the responsibility of the property owner to ensure the installer is qualied to carry out the installation in
a safe and professional manner.
’ Consult local government agencies for up-to-date rules and regulations to satisfy licensing, codes or
regulations that regulate automated gate system design and installation.
’ The gate for which the gate operator is intended to be used should itself be installed correctly so that it is
level and plumb and the gate opens easily and evenly.
’ Note that Nice swing gate systems are not intended for installation on an incline.
www.ApolloGateOpeners.com | (800) 878-7829 | Sales@ApolloGateOpeners.com
To Next Page
Loading...
Need help?
General
