Nidec F600 - Page 38

37 F600 Step By Step Guide
00.059
No flow
setpoint
reduction
29.073 0.00 to 2.55 UU 0.06 UU
00.060
Over-cycle
mode
29.127
Disabled (0), Alarm Only (1), Trip (2), Inc
Setpoint (3)
Alarm Only (1)
00.061
Over-cycle
starts per hour
29.128 0 to 255 5
00.062 0.000
00.063 0.000
00.064
PID 1
proportional
gain
14.010 0.000 to 4.000 2.000
00.065
PID 1 integral
gain
14.011 0.000 to 4.000 1.000
00.066
PID1
reference
14.020 ±100.00 %
00.067 PID feedback 14.021 ±100.00 %
00.068 PID 1 output 14.001 +/-100%
00.069
Output
frequency
5001
VM_SPEED_FR
EQ_REF[MIN] to
VM_SPEED_FR
EQ_REF[MAX]
Hz
00.069
Speed
feedback
3.002
VM_SPEED[MIN] to
VM_SPEED[MAX]
00.070
Percentage
load
4.020
VM_USER_CURRENT[MIN] to
VM_USER_CURRENT[MAX] %
00.071 Output power 5.003
VM_POWER[MIN] to VM_POWER[MAX]
kW
00.072
Analog input 1
current loop
loss
7.028 OFF (0) or ON (1)
00.073
Operating
status
29.003
Inhibit STO (0), Off (Ready)
(1), Hand Run (2), Waking (3),
Pipe Fill (4), Auto Run (5),
Auto Run Leader (6),
Auto Run Assist (7), Pre sleep (8),
Sleeping (9),Cleaning (10),
Level Stop (11),Timer Stop (12),
Hand Timeout (13), Over cycle (14),
Fbck Loss Run (15)Dry Well Run(16)
Dry Well Stop(17) Auto Stop Assist(18)
Inhibit STO (0)
00.074
NV Media
Card Action
Status
11.078
None (0), Active (1), Card Slot 1 (2),
Card Slot 2 (3), Card Slot 3 (4),
Card Slot 4 (5), Card Product (6),
Card User Prog (7), Card Busy (8),
Card Data Exists (9), Card Option (10),
Card Read Only (11), Card Error (12),
Card No Data (13), Card Full (14),
Card File Error (15), Card Rating (16),
Card File Data (17), Card Derivative (18)
00.075
PID final
feedback
29.036 -327.68 to 327.67 UU 0.00 UU
00.076 0.000
Parameter Range Default
Description OL RFC-A RFC-S OL RFC-A RFC-S