107
Movies
Editing Movies
When editing movies, use a sufficiently charged battery to prevent the camera from
turning off during editing. When the battery level indicator is B, movie editing is not
possible.
Extracting Only the Desired Portion of a Movie
The desired portion of a recorded movie can be saved as a separate file.
1 Play back a desired movie and pause at the start point of the
portion that you want to extract (A106).
2 Use the multi selector JK to select
the I control, and then press the
k button.
3 Use HI to select M (choose start
point).
• Use JK or rotate the command dial to move
the start point. You can also adjust it by sliding
the start point icon (A7).
• To cancel editing, select O (back), and press
the k button.
4 Use HI to select N (choose end
point).
• Use JK or rotate the command dial to move
the end point. You can also adjust it by sliding
the end point icon.
• To preview the specified portion, use HI to
select F and then press the k button. Press
the k button again to stop previewing.
Editing Movies
1m30s
1m 0s
Choose start point