Nikon Coolpix A1000 - The Network Menu

158
Using the Menu
The Network Menu
Configure the wireless network settings to connect the camera to a smart device or
the ML-L7 Remote Control (available separately).
• When you establish a wireless connection between the camera and a smart device
with the SnapBridge app installed, you can upload images captured with the
camera to the smart device or perform remote photography. See the included
“SnapBridge Connection Guide” for the connection procedure.
• Some settings cannot be changed while a wireless connection is established. To
change them, disconnect the wireless connection.
The Network Menu
Press the d button M J menu icon M k button
Option Description
Airplane mode Select On to turn off all wireless connections.
Choose connection
Select whether to connect the camera to a smart device or
the ML-L7 Remote Control (available separately).
Connect to smart device
Select when using the SnapBridge app to connect the
camera and a smart device. See the included “SnapBridge
Connection Guide” for more information.
• Select Smart device in Choose connection before
selecting this option.
Connection to remote
Select when connecting the ML-L7 Remote Control
(available separately) with the camera. The camera waits for
the connection to be established (A210).
• Select Remote control in Choose connection before
selecting this option.
Send while shooting
Set the conditions for automatically sending images to a
smart device.
• The size of images that are uploaded is restricted to 2
megapixels. To upload still images at their original size,
use Download pictures in the SnapBridge app.