44
More on Photography
Panorama Assist
The pan direction, Flash mode, Self-timer mode, Focus mode, and Exposure compensation
cannot be changed after the first picture is taken. To change the pan direction, press the
m button to end shooting and repeat steps 1 to 3.
Full-Screen Playback
When you press the i button after starting shooting, Panorama assist mode is terminated
and the most recent picture will be displayed in the monitor.
Using a Tripod
Using a tripod makes it easier to compose overlapping shots.
Joining Panorama Pictures
Transfer the pictures taken with F PANORAMA ASSIST to your computer (c61) and use
the Panorama Maker function in PictureProject to join them into a single scene. For further
information, see the PictureProject Reference Manual (on CD).
Compose the next shot to overlap with
the previous picture.
Take next shot. Repeat steps 6 and 7 until
all shots in series have been taken.
End series.
• Shooting will also end if changing mode
using the mode dial or entering Standby
mode.
To Next Page
Loading...
