708
Shooting
Options:
The
Shooting
Menu
~
Flash Exp. Comp.
Flash
compensation
is
used
to
adjust flash
output
by ±2.0
EV
in increments
of
1/3
EV,
changing the brightness
of
the main subject relative
to
the background.
When the Speedlight S6-400, S6-600, or S6-800 flash
unit
(available separately
from Nikon)
(~
139)
is
mounted
on
the
camera, flash
output
for the flash
(available separately from Nikon)
is
adjusted.
-0.3 - -2.0
Flash
output
is
reduced from
-0.3
to
-2.0
EV,
in increments
of
1/3
EV,
to
prevent
unwanted highlights or reflections.
o(default
setting)
Flash
output
is
not
adjusted.
+0.3 - +2.0
Flash
output
is
increased from +0.3
to
+2.0
EV,
in
increments
of
1/3
EV,
to
make
the
main subject
of
the
frame appear brighter.
At settings
other
than
[01
the
icon for
the
current setting
is
displayed in the
monitor
during shooting
(~6).
~o
Flash Control
Specify
whether
or
not
the
built-in flash fires
when
a flash
unit
(available separately
from Nikon)
mounted
on
the camera's accessory shoe
is
not
used
(~
139).
Auto
(default
setting)
When a flash (available separately from Nikon)
is
mounted,
the
flash fires. When
there
is
no
flash
mounted
on the accessory shoe,
the
built-in flash fires.
Built-in
off
The built-in flash
is
disabled.
~
Notes on Flash Control
When
[Flash
control]
is
set
to
[Built-in off],
only
tRUYO
(Auto), and
G)
(Off), and
~
(Fill flash) flash
modes
(I!
30)
are available.
To Next Page
Loading...
