Connecting to a Computer
5 Transfer pictures
when
Nikon Transfer
has
finished loading.
Click [Start Transfer] in Nikon Transfer. At
the
default setting,
all
pictures are transferred
to
the
computer.
~·'~~;"f~·~~'''~~-'·~;';;;~''--·~.;~~l--::~'~~_
"",,"•
.,,(,
y-
At
the
Nikon Transfer default setting,
the
folder
to
which
pictures are transferred
is
automatically
opened
when
transfer
is
complete.
For more
information
on using Nikon Transfer, refer
to
help
information
con ained in
Nikon Transfer.
6 Disconnect
the
camera
when
transfer
is
complete.
Turn the camera
off
and disconnect
the
USB
cable.
For Users
of
Windows
2000
Professional
Use
a card reader or similar device
to
transfer
the
pictures stored on
the
memory
card
to
the
computer.
If your
memory
card
has
a capacity greater than 2
GB,
the
intended
device
must
support
the
memory
card.
• At
the
Nikon Transfer default settings, Nikon Transfer will start
automatically
when
a
memory
card
is
inserted
into
the
card reader or
similar device.
See
step 5 above
to
transfer pictures.
• Do
not
connect
the
camera
to
the
computer.
If
the
camera
is
connected
to
the
computer,
the
[Found
New
Hardware Wizard] dialog will be
displayed. Select [Cancel], close
the
dialog, and disconnect
the
camera
from
the
computer.
• To transfer pictures stored in
the
camera's internal
memory
to
the
computer,
the
pictures
must
first be
copied
to
a
memory
card using
the
camera
(~
75,
115,
119).
79
To Next Page
Loading...
