Nikon CoolPix P7000 - Shooting in the Scene Selected by the Camera (Scene Auto Selector)

46
Selecting Scenes for Shooting (Scene Mode)
More on Shooting
Shooting in the Scene Selected by the Camera (Scene Auto
Selector)
By simply framing a picture, the camera automatically selects the optimum scene
mode for simpler shooting. When the camera is aimed at a subject in x Scene
auto selector mode, the camera automatically selects one of the following scene
modes.
1 Rotate the mode dial to y.
2 Press the d button to display
the scene menu, choose x Scene
auto selector with the rotary multi
selector and press the k button.
• Scene auto selector is enabled.
• When the built-in flash is not raised, the
message The flash is lowered. is
displayed.
• Press the K (flash pop-up) button to raise the built-in flash.
3 Frame the subject and take the picture.
• When the camera automatically selects a scene mode,
the shooting mode icon changes to that for the scene
mode currently enabled.
• Press the shutter-release button halfway to set the focus and exposure. When the
subject is in focus, the focus area (active focus area) lights in green.
• Press the shutter-release button the rest of the way down to take the picture.
• Auto (general shooting) • Night landscape (A51)
• Portrait (A48) • Close-up (A52)
• Landscape (A48) • Backlighting (A55)
• Night portrait (A49)
d: Auto mode g: Night landscape
e: Portrait i: Close-up
f: Landscape j: Backlighting
h: Night portrait
Scene menu
Scene auto selector
Portrait
Landscape
Sports
Night portrait
Party/indoor
Beach
1/250
1/250
1/250
1342
1342
1342
F5.6
F5.6
F5.6