56
Selecting Scenes for Shooting (Scene Mode)
More on Shooting
Taking Pictures for a Panorama
The camera focuses on the subject in the center of the frame. Using a tripod makes
the composition easier. When the camera is stabilized with a tripod, set Vibration
reduction (A175) to Off in the setup menu (A167).
1
Rotate the mode dial to y.
2
Press the d button to display the
scene menu screen, choose
p Panorama assist with the rotary
multi selector and press the k
button.
• The I icon is displayed to show the
direction in which pictures are joined.
3
Use the rotary multi selector to choose the
direction and press the k button.
• Select the direction in which pictures are joined in the
completed panorama: right (I), left (J), up (K) or
down (L).
• The yellow icon (II) moves to the direction pressed, so
press the k button to choose the direction. A white
icon (I) is displayed in the chosen direction.
• Apply flash mode (A32), self-timer (A35)/remote control (A38), focus mode
(A40) and exposure compensation (A43) settings with this step, if necessary.
• Press the k button again to reselect the direction.
4
Shoot the first picture in the
panorama series.
• The picture taken is displayed in 1/3 of the
monitor.
Scene menu
Fireworks show
Copy
Backlighting
Panorama assist
1/250
1/250
1342
1342
F5.6
F5.6
1/250
1/250
1342
1342
F5.6
F5.6
To Next Page
Loading...
