31
Using the Flash
Basic Photography and Playback: Auto Mode
Setting the Flash Mode
1 Press the X (flash pop-up) button to raise
the built-in flash.
When the built-in flash is lowered, it is fixed to W (off).
2 Press m (flash mode).
The flash menu is displayed.
3 Use the multi selector to choose the desired
flash mode and press k.
The icon for the selected flash mode is displayed at the
top of the monitor.
When U (auto) is applied, D is only displayed for a
five seconds.
If a setting is not applied by pressing k within a few
seconds, the selection will be cancelled.
Flash mode
To Next Page
Loading...
