99
Playback Options: The Playback Menu
Shooting, Playback, and Setup Menus
Selecting Multiple Pictures
When following the steps below to select multiple
pictures for a print set (c 85), deletion (c 101),
protection from deletion (c 101), rotate (c 102),
copying between internal memory and the memory
card (c 102), or for the welcome screen (c 106),
the screen shown at right is displayed. Follow the
procedure described below to select multiple
pictures.
1 Use the rotary multi selector to choose
the desired picture.
Only one picture can be selected for [Rotate image]
and [Welcome screen]. Proceed to step 3.
Press v (k) to switch to full-frame playback.
Press t (j) to switch back to thumbnail display.
2 Press G or H to select [ON] or [OFF] (or
the number of copies).
When [ON] is selected, a check mark (y) is displayed
in the top left corner of the current picture. Repeat
steps 1 and 2 to select additional pictures.
3 Press d.
The setting is enabled.
ON/OFF
Protect
Back
ON/OFF
Protect
Back
ON/OFF
Protect
Back
K
Done
To Next Page
Loading...
