116
Nikon SB-28DX Speedlight
This Speedlight has a guide number of 36 (manual mode, 35mm zoom-
head position, ISO 100 m, 20°C [68°F]) and is powered by four alkaline
batteries. Other power sources (available separately) that can be used with
the SB-28DX include newer models of the SD-6, -7, SK-6, and the SK-6A
and SD-8A. Note, however, that older models of the SD-6, -7, SK-6, and
the SD-8 are not compatible with the SB-28DX. The SC-16A power cord
supplied with newer models of the SD-6, -7 units is available for separate
purchase, and can be used to connect older models to the SB-28DX. The
SD-6, -7 and SK-6 are not available in Europe. The SK-6A is available only
in Europe.
Accessories for the Remote Terminal
The D1 is equipped with a ten-pin remote termi-
nal for remote-control photography, automatic
photography, and connection to other devices.
The terminal is provided with a cap, which pro-
tects the contacts when the terminal is not is use.
The following accessories can be connected:
MC-20 Remote Cord (80cm/2.6´): Remote shutter release; can be used
to reduce camera shake. It is equipped with time-exposure and timer
features, emitting a beep once a second while the shutter is open.
MC-21 Extension Cord (3m/9.8´): Can be connected to the MC-20, MC-
22, MC-25, or MC-30.
MC-22 Remote Cord (1m/3.3´): Remote shutter release with blue, yellow,
and black terminals for connection to a remote shutter-triggering device,
making it possible to control the camera via sound or electronic signals.
MC-25 Adapter Cord (20cm/0.7´): Ten-pin to two-pin adapter cord for
connection to the MW-2 Radio Control Set, the MT-2 Intervalometer, the
ML-2 Modulite Control Set, and other devices with two-pin terminals.
MC-30 Remote Cord (80cm/2.6´): Remote shutter release; can be used
to reduce camera shake. Can be used to lock the shutter-release button
during a time exposure.
ML-2 Modulite Remote Control Set: Allows infrared remote control with
a range of up to 100m (328´). Remote control over greater distances can
be achieved with multiple units. Requires MC-25 Adapter Cord.
ML-3 Modulite Remote Control Set: Allows infrared remote control with
a range of up to 8m (26.2´).
Technical Notes: Optional Accessories
To Next Page
