Nikon D1 - Page 130

117
Software
Two software packages are available for the D1:
Nikon View DX , which
allows you to browse the contents of the camera’s memory when the
camera is connected to the computer via its IEEE 1394 interface, and
Nikon
Capture , which offers remote control and image enhancement features.
Both packages are available in Windows and Macintosh versions; system
requirements are given below.
Nikon View DX
for Windows for Macintosh
OS Microsoft Windows 95, Mac OS 8.6 or later
Windows 98,
Windows NT 4.0 or later
CPU Pentium II, Celeron or higher Power PC G3 or higher
Memory 16MB minimum 16MB minimum
(over 32MB recommended) (over 32MB recommended)
Video VGA (640 × 480 pixels) with VGA (640 × 480 pixels) with
16-bit color or higher 16-bit color or higher
IEEE1394 Adaptec AHA-8920/8945, Built-in IEEE 1394 interface or
HotConnect V1.1 or later Adaptec AHA-8945
Other CD-ROM drive CD-ROM drive
40 MB or more free hard-disk 40 MB or more free hard-disk
space when Nikon View DX is space when Nikon View DX is
running (100 MB or more running (100 MB or more
recommended) recommended)
Nikon Capture
for Windows for Macintosh
OS Microsoft Windows 95, Mac OS 8.6 or later
Windows 98,
Windows NT 4.0 or later
CPU Pentium II, Celeron or higher Power PC G3 or higher
Memory 64MB minimum 32MB minimum
(over 128MB recommended) (over 64MB recommended)
Video VGA (640 × 480 pixels) with VGA (640 × 480 pixels) with
16-bit color or higher 16-bit color or higher
IEEE1394 Adaptec AHA-8920/8945, Built-in IEEE 1394 interface or
HotConnect V1.1 or later Adaptec AHA-8945
Other CD-ROM drive CD-ROM drive
40 MB or more free hard-disk 40 MB or more free hard-disk
space when Nikon Capture is space when Nikon Capture is
running (200 MB or more running (200 MB or more
recommended) recommended)
Technical Notes: Optional Accessories