109
Reference—Connecting to a Computer
5
If PTP is selected for USB ( 121), the camera can be turned off and the
USB cable disconnected once transfer is complete. If the USB option in
the camera setup menu is still at its default setting of Mass Storage, the
camera must fi rst be removed from the system as described below.
Windows XP Home Edition / Windows XP Professional
Click the “Safely Remove Hardware” icon ( )
in the taskbar and select Safely remove USB
Mass Storage Device from the menu that ap-
pears.
Windows 2000 Professional
Click the “Unplug or Eject Hardware” icon (
) in
the taskbar and select Stop USB Mass Storage
Device from the menu that appears.
Windows Millennium Edition (Me)
Click the “Unplug or Eject Hardware” icon ( ) in
the taskbar and select Stop USB Disk from the
menu that appears.
Windows 98 Second Edition (SE)
In My Computer, click with the right mouse but-
ton on the removable disk corresponding to the
camera and select Eject from the menu that ap-
pears.
Macintosh
Drag the camera volume (“NIKON D200”) into
the Trash.
To Next Page
Loading...
Need help?
General
