111
Reference—Printing Photographs
Connecting the Printer
1
Set the USB option in the setup menu to PTP
( 121).
2
Turn the printer on.
3
Turn the camera off and connect the supplied
USB cable as shown. Do not use force or at-
tempt to insert the connectors at an angle. Con-
nect the camera directly to the printer; do not
connect the cable via a USB hub.
4
Turn the camera on. A welcome screen will be
displayed, followed by the PictBridge playback
display. Proceed to “Printing Photographs One
at a Time” ( 112) or “Printing Multiple Photo-
graphs” ( 113).
Press the multi selector left or right to view additional photographs, or
press and hold the button to zoom in on the current photo ( 103).
To view six photographs at a time, press the button and rotate the main
command dial. Use the multi selector to highlight photographs, or press
the button and rotate the main command dial to display the highlighted
photograph full frame.
To Next Page
Loading...
